HTabsOverviewInformation: The microAeth® AL80 is a real-time Black Carbon aerosol monitor. This instrument comes in an outdoor rated enclosure with insulation, sampling inlet protection, and sun shield. It is lightweight and small enough to be quickly installed for measuring aerosol Black Carbon concentration in real-time without intervention for up to approximately 1-2 weeks. The microAeth incorporates the same Aethalometer® measurement technology which has been used worldwide for over 40 years. The AL80 is a self-contained instrument with a built-in, long life brushless pump, closed-loop flow control, and data storage. With new built-in WiFi technology, all data stored locally on the device can be downloaded directly over the device's built-in WiFi interface or transmitted to AethLabs' cloud data management system in real-time or bulk data transfer when a network is available. The instrument operates on wall or solar power continuously for up to approximately 1-2 weeks before the sampling filter must be exchanged. The air sample is collected on Polytetrafluoroethylene (PTFE) filter media. The filter media is housed in an easy to replace filter strip for simple handling in the field. Apllications: Continuous real-time monitoringMobile monitoringDaily filter lifeMulti-week filter lifeExposure assessmentHealth effectsOccupational safetyAmbient air monitoring Stationary monitoringIndoor air qualityVehicle on-road mobile monitoringNetworksFence line monitoringNear-road monitoringUrban environment on street poles Information Brochures: SpecificationSpecification: Measurement Method Real-time Aethalometer® method by measuring the rate of change in absorption of transmitted light due to continuous collection of aerosol deposit on filter. Measurement at 880 nm interpreted as concentration of Black Carbon (‘BC’). Measurement Wavelength 880 nm Timebases (User setting) To be determined Flow Rates (User setting) To be determined Measurement Range 0-1 mg BC/m3, filter life time dependent on concentration and flow rate setting: avg. 5 μg BC/m3 for 96 hours @ 100 ml/min avg. 100 μg BC/m3 for 12 hours @ 50 ml/min avg. 1 mg BC/m3 for 60 minutes @ 50 ml/min Measurement Resolution 0.001 μg BC/m3 Pump Internal long life brushless diaphragm pump Flow Control Internal mass flowmeter with closed-loop control Filter Material / Capacity Polytetrafluoroethylene (PTFE) filter strip material with 1 sampling location per filter Sampling 6 mm spot created on filter strip containing insert of PTFE filter material. PM2.5 size selective inlet available. Environmental Sensors Temperature, Relative Humidity, Altimeter/Barometer, Accelerometer Dimensions and Weight Length: 266 mm (10.47 in) or 241.5mm (9.51 in) without inlet protectionWidth: 262.4 mm (10.33 in)Depth: 183 mm (7.21 in)Without the sun shield, dimensions are:Length: 202 mm (7.95 in)Width: 211 mm (8.31 in)Depth: 166.8 mm (6.57 in)Weight: 2325 grams (82 ounces) or 1389 grams (49 ounces) without back sun shield and inlet protection Memory 4 GB internal flash memory, providing data storage up to: 9 years operating on 1 minute timebase 55 days operating on 1 second timebase Wireless Communications / Data Output Data Stored in local memory.Direct local data download over WiFi interface.WiFi transmission to cloud data management system. Real-time and bulk data transfer when network is available 802.11 b/g/n Wi-Fi Case Outdoor Rated Sealed Enclosure with insulation and sun shield Connections M8 12V Power In (Power In Only) USB-C 5V Power Out (Power Out Only) 3.3V TTL Serial (Flow Calibration Communication) Aerosol sample inlet and outlet ports Power Supply Adapter Input: 100~240 VAC 50/60 Hz 0.4 AOutput: 12VDC / 2A, M8 connector Operation Environment 5 ~ 40 °C operating, non-condensing. Physical Features Sealed outdoor rated enclosure Sun shield and internal insulation ro reduce effects of direct solar radiation Integrated mounting bracket for easy pole or wall installation Integrated mounting features for AL80 Inlet protection kit Secure encrypted communication Key Features Setup, configuration, and management over local WiFi network Remote device management via internet over WiFi Data are accessible directly from local network WiFi Interface and remotely via AethLabs website & API Store-and-forward data buffering to reduce impact of network outages Included microAeth AL80 with sun shield 1 filter strip (installed in instrument) 1 territory-specific M8 AC wall adapter 1 AL80 inlet protection kit Manual available for download via AethLabs website
